Installed prices generally run 4 to 9 dollars per square foot for exposed fastener panels and 10 to 18 for standing seam steel. Labor is usually somewhere between half and two thirds of that on a residential roof, which is why complexity moves the total so much.
Get Metal Roof Cost Guide connects you with licensed local companies. We are not a roofing contractor and do not perform the work ourselves.
Material is the visible cost and labor is the one that varies. Panels for an exposed fastener system might be 2 to 4 dollars per square foot, yet the installed figure is 4 to 9. The gap is the crew, the flashing detail and the trim work.
That is also why a supplier quote and an installer quote are not comparable numbers. See the complete metal roofing guide for how a full quote is built up.
Because they are rarely quoting the same job.
the full cost picture covers what the finished work involves.
Labor, on most residential metal roofs. Material is frequently under half the installed figure once flashing, trim and detail work are counted.
Commonly yes. A roofing square is 100 square feet, so 12 dollars per square foot is 1,200 per square. Check which unit a quote uses before comparing.
Usually scope rather than generosity. Thinner gauge, basic underlayment, no deck allowance and excluded tear-off all reduce a price legitimately.
Get Matched
Tell us about your roof and we will connect you with licensed companies working in your area. There is no obligation to hire anyone.
